Order Now

Wood Boiler Solutions llc

Non-Pressurized "Open" Outdoor Wood Boiler

 
 
Step 1 Clean and passivate system with required amount of Prep Solution 102™ per directions for new boiler.
Step 2 Drain and flush thoroughly.
Step 3 Refill and add required amount of Treatment Solution 101™. System is ready for use.
Step 4 Test chemical level each month and add accordingly to always maintain a proper chemical level.
Step 5 Prior to the end of the heating season and if draining add Prep 102 per directions.
Step 6 Drain and flush thoroughly.
Step 7 Refill and add required amount of Treatment Solution 101™.
Step 8

Repeat Steps 4 - 7.  

**

If necessary use Scale-Out Solution 115™ per directions at Step 5. (FLUSH THOROUGHLY) Following Scale-Out repeat steps beginning with Step 1.

SEASONAL DRAINING IS NOT ALWAYS NECESSARY BUT CAN NEVER HURT AS LONG AS THE SYSTEM IS ALWAYS ADEQUATELY TREATED WHEN REFILLED. OUR ADVICE:  DRAIN ONCE EACH YEAR IF YOU ARE ADDING 5% OR MORE OF YOUR TOTAL SYSTEM VOLUME EACH MONTH TO YOUR BOILER TO MAKE UP FOR EVAPORATIVE LOSSES. EXAMPLE:  BOILER HOLDS 100 TOTAL GALLONS AND YOU ARE ADDING 5 GALLONS OF WATER A MONTH BECAUSE YOU "BOIL OFF" THAT MUCH=YOU SHOULD DRAIN ONCE A SEASON OR YOU WILL GREATLY INCREASE YOUR CHANCES FOR SCALE DEPOSITION AND ACCELERATED CORROSION.

 
Existing Non-Pressurized "Open" Outdoor Wood Boiler
 
 
Step 1 Address and remove existing scale deposits if any exist following directions and dosages for Scale-Out Solution 115™. (FLUSH THOROUGHLY)
Step 2 Clean and passivate system with required amount of Prep Solution 102™ per directions for an existing boiler.
Step 3 Follow Steps 2-8 for a new outdoor wood boiler.
Information, Solutions and Quality Products for Outdoor Wood Boiler Owners